Opcom Transponder Key Coding

Reset BCM (virginate), switch off and take key out and leave for few seconds, then go into immo and BCM intalled and put pin code, switch off and take key out for few second. Then programme key and check fault codes.If wrong Environment identifer fault codes in any other module like airbag,abs, then reset that module, one at a time and taking. Yes, once you have had the new key cut by a Locksmith use the following instructions. Insert an existing working key into the ignition cylinder. Turn the ignition cylinder to ON (RUN) and back to OFF. Remove the existing working key and, within five seconds, insert a second working key and turn it to ON (RUN) then back OFF. Click “Clear Fault Codes” and the code “P1614-50 Wrong Transponder Key” still exist. Then you need to remove key and plug it in again. Now all codes are cleared and car’s immobilizer light is off. OPCOM software will display fault codes. Click “Clear Fault Codes” and the code “P1614-50 Wrong Transponder Key” still exist. Then you need to remove key and plug it in again. And all codes are cleared and car’s immobilizer light is off. Now all things done! OPCOM reset and reprogram Vauxhall Astra H 2004 ECU immobilizer successfully!

Advanced Diagnostics/Ilco has been working hard to develop the systems and equipment that Automotive Locksmiths need to handle any job and let them make their customer’s day. These include transponder key programmers and key cutting machines.

Whether the job is cutting keys for the ignition or programming transponder keys for the ECU, look no further than these tools from AD Ilco, all in stock today at H.L. Flake Security Hardware.

Transponder Key Programmers

The SmartPro is AD Ilco’s newest Vehicle Key Programmer introduced to replace the previous industry standards, their MVP and T-Code Pro. It is a state-of-the-art vehicle key, proximity and remote keyless entry programmer that provides fast, easy and intuitive programming through a high res, color graphic user interface.

Key Features

• Integrated security – no dongles or smart cards are required
• Fast programming
• Free 6 months unlimited use
• Icon driven user interface with easy to use vehicle menu search
• Intuitive touch screen user interface
• Fast updates for software modules individually via Wifi or PC
• Compatible with the Smart Aerial
• Internal battery with 2 hrs stand-alone use
• Battery backup in the event of a power disruption

Key Cutting Machines

Another AD Ilco device coming as a successor to a hugely popular and powerful entry is the Futura Pro Key Machine. AD Ilco’s Futura Pro High Security Key Cutting Machine combines the original Futura’s signature dual cutting stations with significantly faster cutting and improved software for unparalleled precision and accuracy. The Futura Pro is now AD Ilco’s premier electronic key cutting machine for Edge-Cut, Laser-Cut, Cruciform, and Dimple keys.

Edge Cut and Cruciform Station

• Decode via optical reader to OEM specifications
• Copy by original function via optical reader for exact duplication of originals
• Guided calibration of the cutting station.
• Four position jaw (clamp) accommodates a wide variety of keys

Laser and Dimple Station

• Decode and copy by electrical contact to OEM specifications
• Automatic Calibration
• Interchangeable clamp jaws
• Optional Accessories expand capabilities to include Tibbe®, tubular and more

Work Efficiencies

• Fast cutting cycles; cutters reach speeds of 1,585 rpm (edge cut keys) and 12,100 rpm (laser/dimple keys)
• Quick start up, fast response times
• Two USB ports; one for charging the tablet and a second port for tethering the tablet and to connect USB flash drive to import code tables or for machine software updates
• Tip stop tool for the edge cut clamp station (position 4)
• Kreate-A-Key / Instacode Interface included
• LED lighting and visual process control (white = ready, yellow = cutting in process, green = cutting complete)
• Built-in hood accessory tray for tools and/or keys
• Integrated tool holder for cutters and tracers

Touch Screen, Wi-Fi Innovation

• 10″ (254 mm) tablet, with removable stand
• Step by step menu prompts to simplify key selection, cutter, clamp, position etc.
• Key cut preview to check and correct worn keys
• Shortcut card search function eliminates manual entry
• Guided, step-by-step updating procedure

1. OPCOM is a special PC Based diagnostic interface especially for OPEL.

3. Never Update It Online, It Will Damage The OP-COM

OP-COM is a PC based diagnostic program.

It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.

The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.

The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.

Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

Fault codes will be shown with all available information:

• Full fault code text description
• Full status information (Present, Not present, Intermittent)

You can print out, save, or copy the fault codes to any other application.

From the fault codes window, you can go directly to the measuring blocks window.
The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.

With OP-COM:

* You can learn keys to immobiliser, and remote keys to the central door locking, or alarm.
* You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
* You will need the vehicle security code, which can be found on the CAR-PASS.
* You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B
* You can code SAB6, and SAB8 airbags with the software.

The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.

* Support 2008 Models
* Support Saab 9-5 and Saab 9-3 CAN
* Covers almost all Opel cars from 1992 - 2008, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B

OP-COM is currently available at the following languages:
English only
IMPORTANT: The program can only be used with a special interface
Hardware.
A simple serial or USB port based standard interfaces, (K, KKL, etc) cannot be used!

FAQ:
Q1: Does this product has any other language other than English?
A1: This product have English and germany version.
Q2:What we can do with this device?
A2:1. You will get a feedback on the state of the activated output. This will helps you to find the failed. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.
2. You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
3. You will need the vehicle security code, which can be found on the CAR-PASS.
4. You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva
5. You can code SAB6, and SAB8 airbags with the software.
6. The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
7. The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
8. Compared to the TECH2, which is the dealers tool (with a 32 MB Card+CANdi interface), the price of OP-COM is quite affordable.

A full list of supported cars:

Picopix 2055 mac driver download. Agila 2000-2009

Antara 2009

Astra-F 1992-2002

Astra-G 1998-2010

Microsoft office 2016 free download. Astra-H 2004-2010

Astra-J 2010

Calibra 1996-1999

Campo 2001-2003

Captiva 2009

Captiva MAXX 2010

Combo-C 2001-2010

Corsa-B 1994-2003

Corsa-C 2001-2010

Corsa-D 2009-2010

Frontera 1996-1999

Frontera-B 1999-2003

Insignia 2010

Meriva 2003-2009

Monterey 1997-1999

Movano 1999-2010

Omega-b 1994-2003

Sintra 1997-1999

Speedster/VX220 2001-2010

Tigra 1999-2000

Tigra-B 2005-2009

Vectra-A 1992-1995

Vectra-B 1996-2002 https://venmurcolmo.tistory.com/5.

Vectra-C/Signum 2002-2009

Vivaro 2001-2009

Zafira 1999-2005

Opcom Transponder Key Coding Manual

Zafira-B 2005-2010

GM Based SAAB 9-3

GM Based SAAB 9-5

These are just a few things you can do plus many more

Reading and removing fault codes

Program keys

Cruise control activation and programming

Real time display of parameters

Reset service interval reminder

Throttle body reset

Lots of manuals on exactly how to do things like:

https://venmurcolmo.tistory.com/7. Dis (Display) Code index list

DLC locations

Airbag coding

Clear SDM deployment data

Cruise control

Diesel pump programming

Opcom Transponder Key Coding Guide

Injector programming

Manual DPF regeneration

New CIM programming

Read security code

SDM programming

Service interval reset

Throttle body reset

Towbar abd trailer module coding

Opcom Transponder Key Coding Software

Immobiliser guide

Opcom Transponder Key Coding Tool

Replace the BCM